How To Light Pilot Light On Ventless Gas Fireplace References. Depending on how long it’s been since the gas fireplace was last used, ignition may take several attempts before igniting. You will need to hold your pilot button for the allotted time that your owner’s manual suggests.
When you are in the off (full clockwise) position, rotate clockwise (approximately 1/8 turn) to the position of the pilot and then push on the control knob completely into. First, hold down the gas control button while also holding the end of your lighter or. Most gas fireplaces have a standing pilot light, which is a small flame that burns even when you aren't using the fireplace.
When You Are In The Off (Full Clockwise) Position, Rotate Clockwise (Approximately 1/8 Turn) To The Position Of The Pilot And Then Push On The Control Knob Completely Into.
Our own gas fireplace insert is an older model and the pilot light is the standing flame type rather than the intermittent pilot ignition found often found. When the fireplace or propane heater is turned on, the pilot light serves as an ignition source for the larger sweep of gas released from the burner. Place the control knob in the pilot position.
Ventless Gas Fireplace Experts 300 Vent Free Fireplaces.
Push the igniter button once every second until it lights. This continuous flame is necessary to light large burners such as those found in gas fireplaces. Keeping the pilot light on will also keep moisture out of the unit and in turn, help prevent corrosion.
The Fire Should Be Lit.
Turn the knob from the “off” to the “pilot” position. 2) verify that any and all gas valves are opened prior to the firebox. First, hold down the gas control button while also holding the end of your lighter or.
We Shall Also Discuss The Two Standard Methods Of Lighting A Gas Fireplace.
Pilot lights but flame goes out. Most gas fireplaces have a standing pilot light, which is a small flame that burns even when you aren't using the fireplace. This makes the fireplace easy to start when it's cold outside, but during the warm seasons when you aren't using the fireplace, it's a good idea to shut off the pilot to conserve gas.
No Worries, The Gas Fireplace Flame Goes Out Troubleshooting Will Help You In This Case.
Make sure your main gas supply is on. 1) this appliance is equipped with a piezo igniter which will light the pilot. After lighting gas logs pilot light, set the handle to the “on” position.