How To Replace A Two Handle Bathtub Faucet Cartridge References. For a cartridge faucet with one handle: The process is the same whether you have a single handle faucet or one with multiple controls.
3 wrap a piece of friction tape around the packing nuts on top of the. Use an allen wrench or small screwdriver to remove the screw, then carefully use your hand or pliers to remove the handle of the faucet. Pull the cartridge straight up to remove it from the faucet body.
How To Repair A 2 Handle Cartridge Faucet.
Brass/ceramic stem unit that can be used in place of rp24096, used with rp10700 ceramic seats and springs. Once you have untightened the handle and spigot, slowly remove them from the valve assembly. It is recommended to clean and flush the valve body (#3) prior to installing the new cartridge (#2).
Remove The Old Cartridge And Replace With The New Cartridge.
Now, use the wrench to remove the old cartridge. Repeat for the other angled handle. Depending on the supplier code of your faucet, your bonnet nut may have different threading.
Single Handle Bathroom Faucets (Prior To 2009) 1255.
You’ll likely need to remove a bonnet nut or retaining nut. Check the water’s flow as well. First unscrew the set screw on the side of the handle, pull it off and unscrew the bonnet under the handle.
It Will Reveal The Cartridge In Front Of You.
Remove and replace the cartridge. 14 steps (with pictures) from www.wikihow.com remove and replace the stem, handles, & spout replacing a bathtub faucet is a pretty simple process. Bathtub cartridges regulate water flow and temperature.
If It Does, Fix It By Removing The Handles Again And Rotating The Cartridge By 180 Degrees.
If necessary, grab the shaft at the top of the cartridge with pliers to pull out the cartridge. Replace the sleeve and tighten. Use an allen wrench or small screwdriver to remove the screw, then carefully use your hand or pliers to remove the handle of the faucet.